vjmedia - User contributions [en]

Loop Recording Glove Project

2019-10-09T16:23:05Z

Pmara:

This project is a simple creation that helps users create objects in max based off rhythm ideas they have in their head. There is a flex sensor sewn into the pointer and middle finger on the glove that activate certain sequences of arduino code if they are flexed. The Hardware used for the project is the Arduino Circuit Playground Express. It had lots of sensors, but only the buttons were used for this particular application. The purpose of the project is to quickly take an idea from your head and naturally record it somewhere. Your hands are your most natural HID!
To move to the next setting, the user presses both the left and right buttons.
First, a user taps out a beat over 10 seconds to establish a tempo.
Then, they select a total number of measures (4 beats per measure)
The beat is used to take readings (4 readings/beat). Arduino then passed the value that each flex sensor was to max for each of these time intervals, so the user can play them back, edit them, or same them later.

{|style="margin: 0 auto;"
| [[File:Sewn_flex.jpeg |300px|thumb|First, the flex sensors were sewn into pockets]]
| [[File:Device_Setup.jpg |500px|thumb|Program Testing]]
| [[File:Final_Glove.jpg|500px|thumb|The final product]]
|}

Below is a quick demo of the system and further description:

<htmltag tagname="iframe" id="ensembleEmbeddedContent_fqnI6uZP70Gn_12HyCkGLQ" src="https://video.wpi.edu/hapi/v1/contents/eac8a97e-4fe6-41ef-a7ff-5d87c829062d/plugin?embedAsThumbnail=false&displayTitle=false&startTime=0&autoPlay=false&hideControls=true&showCaptions=false&width=852&height=480&displaySharing=false&displayAnnotations=false&displayAttachments=false&displayLinks=false&displayEmbedCode=false&displayDownloadIcon=false&displayMetaData=false&displayCredits=false&displayCaptionSearch=false&audioPreviewImage=false&displayViewersReport=false" title="FinalProjMusicProgrammingPJ" frameborder="0" height="480" width="852" allowfullscreen></htmltag>

Check out my other projects:
[//pjmarawork.wixsite.com/projects Other Projects].

[[Category:Interactive Systems]]

Loop Recording Glove Project

2019-10-09T16:22:39Z

Pmara:

This project is a simple creation that helps users create objects in max based off rhythm ideas they have in their head. There is a flex sensor sewn into the pointer and middle finger on the glove that activate certain sequences of arduino code if they are flexed. The Hardware used for the project is the Arduino Circuit Playground Express. It had lots of sensors, but only the buttons were used for this particular application. The purpose of the project is to quickly take an idea from your head and naturally record it somewhere. Your hands are your most natural HID!
To move to the next setting, the user presses both the left and right buttons.
First, a user taps out a beat over 10 seconds to establish a tempo.
Then, they select a total number of measures (4 beats per measure)
The beat is used to take readings (4 readings/beat). Arduino then passed the value that each flex sensor was to max for each of these time intervals, so the user can play them back, edit them, or same them later.

{|style="margin: 0 auto;"
| [[File:Sewn_flex.jpeg |300px|thumb|First, the flex sensors were sewn into pockets]]
| [[File:Device_Setup.jpg |500px|thumb|Program Testing]]
| [[File:Final_Glove.jpg|500px|thumb|The final product]]
|}

Below is a quick demo of the system and further description:

<htmltag tagname="iframe" id="ensembleEmbeddedContent_fqnI6uZP70Gn_12HyCkGLQ" src="https://video.wpi.edu/hapi/v1/contents/eac8a97e-4fe6-41ef-a7ff-5d87c829062d/plugin?embedAsThumbnail=false&displayTitle=false&startTime=0&autoPlay=false&hideControls=true&showCaptions=false&width=852&height=480&displaySharing=false&displayAnnotations=false&displayAttachments=false&displayLinks=false&displayEmbedCode=false&displayDownloadIcon=false&displayMetaData=false&displayCredits=false&displayCaptionSearch=false&audioPreviewImage=false&displayViewersReport=false" title="FinalProjMusicProgrammingPJ" frameborder="0" height="480" width="852" allowfullscreen></htmltag>

Check out my other projects:
[//https://pjmarawork.wixsite.com/projects Other Projects].

[[Category:Interactive Systems]]

Loop Recording Glove Project

2019-10-09T16:20:25Z

Pmara:

Loop Recording Glove Project

2019-10-09T16:19:10Z

Pmara:

Loop Recording Glove Project

2019-10-09T16:15:42Z

Pmara:

This project is a simple creation that helps users create objects in max based off rhythm ideas they have in their head.
First, a user taps out a beat.
Then, they select a total number of measures (4 beats per measure)
The beat is used to take readings (4 readings/beat). Arduino then passed the value that each flex sensor was to max for each of these time intervals, so the user can play them back, edit them, or same them later.

The purpose of the project is to quickly take an idea from your head and naturally record it somewhere. Your hands are your most natural HID!

:

{|style="margin: 0 auto;"
| [[File:Sewn_flex.jpeg |300px|thumb|First, the flex sensors were sewn into pockets]]
| [[File:Device_Setup.jpg |300px|thumb|Program Testing]]
| [[File:Final_Glove.jpg|300px|thumb|Here it is folded up]]
|}

Below is a quick demo of the system and further description:

<htmltag tagname="iframe" id="ensembleEmbeddedContent_fqnI6uZP70Gn_12HyCkGLQ" src="https://video.wpi.edu/hapi/v1/contents/eac8a97e-4fe6-41ef-a7ff-5d87c829062d/plugin?embedAsThumbnail=false&displayTitle=false&startTime=0&autoPlay=false&hideControls=true&showCaptions=false&width=852&height=480&displaySharing=false&displayAnnotations=false&displayAttachments=false&displayLinks=false&displayEmbedCode=false&displayDownloadIcon=false&displayMetaData=false&displayCredits=false&displayCaptionSearch=false&audioPreviewImage=false&displayViewersReport=false" title="FinalProjMusicProgrammingPJ" frameborder="0" height="480" width="852" allowfullscreen></htmltag>

Loop Recording Glove Project

2019-10-09T16:15:28Z

Pmara: added pictures

This project is a simple creation that helps users create objects in max based off rhythm ideas they have in their head.
First, a user taps out a beat.
Then, they select a total number of measures (4 beats per measure)
The beat is used to take readings (4 readings/beat). Arduino then passed the value that each flex sensor was to max for each of these time intervals, so the user can play them back, edit them, or same them later.

The purpose of the project is to quickly take an idea from your head and naturally record it somewhere. Your hands are your most natural HID!

:

{|style="margin: 0 auto;"
| [[File:Sewn_flex.jpeg |300px|thumb|First, the flex sensors were sewn into pockets]]
| [[File:Device_Setup.jpeg |300px|thumb|Program Testing]]
| [[File:Final_Glove.jpg|300px|thumb|Here it is folded up]]
|}

Below is a quick demo of the system and further description:

<htmltag tagname="iframe" id="ensembleEmbeddedContent_fqnI6uZP70Gn_12HyCkGLQ" src="https://video.wpi.edu/hapi/v1/contents/eac8a97e-4fe6-41ef-a7ff-5d87c829062d/plugin?embedAsThumbnail=false&displayTitle=false&startTime=0&autoPlay=false&hideControls=true&showCaptions=false&width=852&height=480&displaySharing=false&displayAnnotations=false&displayAttachments=false&displayLinks=false&displayEmbedCode=false&displayDownloadIcon=false&displayMetaData=false&displayCredits=false&displayCaptionSearch=false&audioPreviewImage=false&displayViewersReport=false" title="FinalProjMusicProgrammingPJ" frameborder="0" height="480" width="852" allowfullscreen></htmltag>

File:Final Glove.jpg

2019-10-09T16:15:13Z

Pmara: the final glove

the final glove

File:Device Setup.jpg

2019-10-09T16:12:20Z

Pmara: picture of device plugged in

picture of device plugged in

Loop Recording Glove Project

2019-10-09T15:33:27Z

Pmara:

This project is a simple creation that helps users create objects in max based off rhythm ideas they have in their head.
First, a user taps out a beat.
Then, they select a total number of measures (4 beats per measure)
The beat is used to take readings (4 readings/beat). Arduino then passed the value that each flex sensor was to max for each of these time intervals, so the user can play them back, edit them, or same them later.

The purpose of the project is to quickly take an idea from your head and naturally record it somewhere. Your hands are your most natural HID!

First, the flex sensors were sewn into pockets:
[[File:Sewn_flex.jpeg]]

Below is a quick demo of the system and further description:

<htmltag tagname="iframe" id="ensembleEmbeddedContent_fqnI6uZP70Gn_12HyCkGLQ" src="https://video.wpi.edu/hapi/v1/contents/eac8a97e-4fe6-41ef-a7ff-5d87c829062d/plugin?embedAsThumbnail=false&displayTitle=false&startTime=0&autoPlay=false&hideControls=true&showCaptions=false&width=852&height=480&displaySharing=false&displayAnnotations=false&displayAttachments=false&displayLinks=false&displayEmbedCode=false&displayDownloadIcon=false&displayMetaData=false&displayCredits=false&displayCaptionSearch=false&audioPreviewImage=false&displayViewersReport=false" title="FinalProjMusicProgrammingPJ" frameborder="0" height="480" width="852" allowfullscreen></htmltag>

Loop Recording Glove Project

2019-10-09T15:32:09Z

Pmara:

This project is a simple creation that helps users create objects in max based off rhythm ideas they have in their head.
First, a user taps out a beat.
Then, they select a total number of measures (4 beats per measure)
The beat is used to take readings (4 readings/beat). Arduino then passed the value that each flex sensor was to max for each of these time intervals, so the user can play them back, edit them, or same them later.

The purpose of the project is to quickly take an idea from your head and naturally record it somewhere. Your hands are your most natural HID!

First, the flex sensors were sewn into pockets:
[[File:Sewn_flex.jpeg]]

Below is a quick demo of the system and further description:

<htmltag tagname="iframe" id="ensembleEmbeddedContent_fqnI6uZP70Gn_12HyCkGLQ" src="https://video.wpi.edu/hapi/v1/contents/eac8a97e-4fe6-41ef-a7ff-5d87c829062d/plugin?embedAsThumbnail=false&displayTitle=false&startTime=0&autoPlay=false&hideControls=true&showCaptions=false&displaySharing=false&displayAnnotations=false&displayAttachments=false&displayLinks=false&displayEmbedCode=false&displayDownloadIcon=false&displayMetaData=false&displayCredits=false&audioPreviewImage=false&displayCaptionSearch=false&displayViewersReport=false" title="FinalProjMusicProgrammingPJ" frameborder="0" style="position: absolute; top: 500; left: 0; width: 100%; height: 100%;" scrolling="no" allowfullscreen></htmltag>

Loop Recording Glove Project

2019-10-09T15:31:23Z

Pmara: added video

This project is a simple creation that helps users create objects in max based off rhythm ideas they have in their head.
First, a user taps out a beat.
Then, they select a total number of measures (4 beats per measure)
The beat is used to take readings (4 readings/beat). Arduino then passed the value that each flex sensor was to max for each of these time intervals, so the user can play them back, edit them, or same them later.

The purpose of the project is to quickly take an idea from your head and naturally record it somewhere. Your hands are your most natural HID!

First, the flex sensors were sewn into pockets:
[[File:Sewn_flex.jpeg]]

Below is a quick demo of the system and further description:

<htmltag tagname="iframe" id="ensembleEmbeddedContent_fqnI6uZP70Gn_12HyCkGLQ" src="https://video.wpi.edu/hapi/v1/contents/eac8a97e-4fe6-41ef-a7ff-5d87c829062d/plugin?embedAsThumbnail=false&displayTitle=false&startTime=0&autoPlay=false&hideControls=true&showCaptions=false&displaySharing=false&displayAnnotations=false&displayAttachments=false&displayLinks=false&displayEmbedCode=false&displayDownloadIcon=false&displayMetaData=false&displayCredits=false&audioPreviewImage=false&displayCaptionSearch=false&displayViewersReport=false" title="FinalProjMusicProgrammingPJ" frameborder="0" style="position: absolute; top: 0; left: 0; width: 100%; height: 100%;" scrolling="no" allowfullscreen></htmltag>

Loop Recording Glove Project

2019-10-09T15:26:27Z

Pmara:

Loop Recording Glove Project

2019-10-09T15:25:44Z

Pmara:

Loop Recording Glove Project

2019-10-09T15:25:09Z

Pmara: Flex sensor glove to record finger taps

File:Sewn flex.jpeg

2019-10-09T15:24:37Z

Pmara: flex sensor sewn into pocket

flex sensor sewn into pocket